Digiprog 3 V4.94 correct mileage for Toyota Hilux 93c66
Gm-Tech2.com engineers today tested Digiprog 3 v4.94 odometer correction tool on Toyota hilux 93c66. Here displays the test procedure.
Tool used: Digiprog3 v4.94 odometer programmer
Model: Toyota HILUX C66
Procedure of odometer correction with Digiprog 3 master:
Pin out connection:
COMPRUEBE VALOR ESCRITO – 61132KM
Mileage is changed successfully, from 132005KM to 61132KM.
NOTE: Tips for Using Digiprog III:
Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
Always keep your DigiProg 3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned
completely as the solvent can damage the clips.