DS17 EDC17 MED17 Infineon Tricore Boot Reader software installation


Here is the instruction on how to install DS17 reader software step-by-step. DS17 EDC17 MED17 ECU Infineon Tricore Boot Reader is an updated version of BDM100 ECU programmer, it takes direct access on processor and EPROM memory of the ECU over a dedicated port like the BDM system.

DS17-Infineon-Tricore-Boot-Reader

Free download software for DS17 Infineon Tricore Boot Reader

Step 1: Install software setup

Open software CD

Open DS17 folder

Open and install “DS17 Bsi-To-Go Setup”

Select software language, English or Deutsch

DS17-Infineon-Tricore-Boot-Reader-software-1

Click OK

Install Bsi-To-Go Setup wizard

DS17-Infineon-Tricore-Boot-Reader-software-2

Click Next

Accept license agreement

Click Next

Click Next

Click Next

Click Next to create desktop shortcut

Click Install

Completing the Bsi-To-Go Setup

Tick “Launch Bsi-To-Go” option and press Finish

DS17-Infineon-Tricore-Boot-Reader-software-3

If the system pops up Bsi-To-Go 1.14.00 windows, cancel it.

 

Step 2: Install driver

Connect the DS17 Infineon Tricore Boot Reader interface with computer via USB cable

The system starts to found the new hardware wizard

Select “Install from a list of specific location (Advanced)”, click Next

DS17-Infineon-Tricore-Boot-Reader-software-4

Browse and save file to C:\Program Files\ EVC\BsiToGo\driver

DS17-Infineon-Tricore-Boot-Reader-software-5

Click Next

The system will display “Cannot Start this Hardware” error, click Finish

Open My Computer->Manager->Device Manager->Universal Serial Bus controller->BSL 100

We will see the BSL100 status is disabled, click BSL100

DS17-Infineon-Tricore-Boot-Reader-software-6

Reflash the windows until the BSL100 device can be detected

DS17-Infineon-Tricore-Boot-Reader-software-7

Step 3: Read/Write ECU

Open Bsi-To-Go software on the desktop

Select “Read an ECU”

DS17-Infineon-Tricore-Boot-Reader-software-8

Click Next

Choose ECU type

DS17-Infineon-Tricore-Boot-Reader-software-9

Click Next

Back to Bsi-To-Go 1.14.00 menu, select Show this dialog in English

Follow the system prompts to operate

 

Ps.

DS17 Infineon Tricore Boot Reader Support list:

EDC17/MED17/ME17/MEV17/MEVD17/PCF2.1/SD13/SD14/SD16/SID208/SID807, please check herehttps://www.Gm-Tech2.com/wholesale/ds17-infineon-tricore-boot-reader.html