Original Autohex II BMW Lite Locksmith with HW4 is suitable for BMW Locksmith Technician who is looking to have a startup solution for BMW keys programming (with HexTag for free).
Original V1.0.61 Autohex II Diagnostic Scan Tool + HexTag Programmer
Why do you buy Microtronik Autohex II BMW Lite Locksmith from Gm-Tech2 ?
Microtronik Autohex II BMW Lite Locksmith Highlights
- Microtronik official authorized dealer
- Update Online on www.microtronik.com, 1 Year Warranty
- 1 year technical support from Microtronik official
- Lifetime Tech Support Online from Gm-Tech2
● Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely
● Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol
● Modify KOMBI Mileage
● Renew all BMW keys, and many other brands
● Unlock security of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM
● Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
Autohex II HW4 and the essential features needed to program BMW keys for E and F series, solving all cases including all keys lost
With Autohex II HW4 Tool you can do as following:
● Read old ISN in BMW E series for following Ecus: D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6,
N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
● Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2,
MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0,
D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
● Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
● Read long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
● CAS1, CAS2, CAS3 and CAS3+ read only ISN and SK
● Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
● Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
● ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
● Read ISN of MSD85, MSD87, MSV90 in F series.
● ECU Cloning/Tuning for a wide range of brands.
This function is free for 90 days (Check Supported ECU List
1. HexTag ECU Cloning Function is free trial only for 90 days, If you need ECU Cloning License after 90days, you can pay $1000 for subscription at the first year, after which annual update fee is $750.
2. 1 year warranty, but no service for return for refund, please kindly note,thank you.
What you miss in this Kit:
BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)
Modify ISN/SK in DME, DDE and CAS by OBD (can be ordered later)
Reset EGS 6HP/8HP EWS (can be ordered later)
Ecu Coding, and Vehicle Order managing (can be ordered later)
ISN Reading from Tricore Ecus by boot mode. (can be ordered later)
Autohex II Hardware WVCI HW4
The Powerful HexTag BDM and Key programmer
BMW Software Lite Locksmith License
Key Programming License
BMW ISTA/D Driver to Run Dealer Software