Wifi BENZ C6 OEM DOIP Xentry Diagnosis VCI Multiplexer Without HDD Supports DTS Monaco

Item No. SP332 In Stock. History 111 sold.

Buy Now: $429
2 BENZ C6: without Software HDD Wifi BENZ C6 OEM DOIP Xentry Diagnosis VCI Multiplexer Without HDD Supports DTS Monaco
We are here to provide you with a Better Price:
Email: [email protected]
Whatsapp:+86 18150118226
Free Shipping Express Shipping ServiceEstimated delivery time: 5-7 days »
0.7KG ( 1.54LB )
29cm*19cm*6cm ( Inch: 11.39*7.46*2.36 )
Return for refund within 30 days,buyer pays return shipping. Read details »

Product Description

  1. Supports Benz & Smart vehicles.
  2. Supports DTS Monaco.
  3. Compatible with VXDIAG for XENTRY/Das Software

WIFI BENZ C6 OEM DOIP Xentry Diagnosis VCI Multiplexer Without HDD


  • Compatible Software: VXDIAG For XENTRY/Das Software
  • Supported Vehicles: Mercede For Benz & Smart vehicles
  • Supports DoIP
  • Star Diagnostic & programming (SCN Coding)
  • Covers more functions during SCN Coding than SD C4/C5

WiFi Password for BENZ C6 : 12345678 or 123456789

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Passthru interface is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5.
XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.

Mercedes Benz Xentry diagnosis VCI DOIP Passthru interface C6 Features:

  • For all model series of For Mercedes Benz vehicles
  • Supports DoIP
  • Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
  • Diagnosis updates no longer necessary – firmware updates required on rare occasions
  • Does not need a power supply unit for external power supply
  • Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
  • Engines (All Gasoline & Diesel Systems)
  • Transmissions and Electronic Selector Modules
  • Airmatic and Active Body Control Suspension Systems
  • Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
  • Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
  • Drive Authorisation System
  • Sam (Signal Acquisition) Modules
  • Electronic Ignition System (EIS)
  • Pneumatic System Equipment and ATA functions
  • Air Conditioning / climate control Systems
  • Instrument Cluster
  • Tyre Pressure Control
  • Parktronic System
  • Keyless Go
  • D2b Command & Audio Gateway (D2B and MOST networks)
  • TV Tuner
  • Headlamp Range Adjustment
  • Seat Electronics
  • Rvc, RST & Vario Roof modules
  • Automatic Clutch System ACS
  • M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
  • Assyst & ASSYST + systems
  • Diesel Particulate Filter (DPF) Regeneration

Mercedes Benz Xentry diagnosis VCI DOIP Pass thru interface C6 Summary:

Mercedes Benz Xentry diagnosis VCI DOIP Passthru interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

Mercedes Benz Xentry diagnosis VCI DOIP Passthru interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.


1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2. Mercedes Benz Xentry diagnosis VCI DOIP Pass thru interface C6 can't support All Key Lost, needs one key at least.

What is DOIP?

DOIP is ISO 13400 diagnostic protocol

ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.

The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:

enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.

The mercedes Land Rover JLR all use this new Diagnostic Protocol now.

Where do you need DOIP device?

when we test mercedes new car like w222 w205

In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

BENZ C6 Diagnostic Tool PCB

BENZ C6 PC board
mb star c4 pcb board

Packing List

1 set BENZ C6 Scanner


WiFi Benz OEM C6 DoIP Xentry VCI Unpacking

Tech Support

Tutorial: how to activate/register latest version 2019.12 Xentry and update vxdiag benz multi tool vci firmware.



The procedure can be applied to:

VXDIAG Benz C6 doip

OEM Benz C6 using VXDIAG solution


  • 2019.12 Xentry DAS does not require activation. Ready to use.
  • DTS Monaco engineer software requires USB connection with vxdiag c6 and laptop
  • EPC WIS requires activation.


How to activate VXDIAG Benz C6 EPC WIS Software?

Activate Vxdiag Benz Xentry 1

Open WIS-EPC admin12345 on desktop

Activate Vxdiag Benz Xentry 2

Enter User name: admin and password: 12345

Activate Vxdiag Benz Xentry 3

Open EWS-net brower

Select Administration->Server->Edit the access authorization

Activate Vxdiag Benz Xentry 4

Find WIS/ASRA activation Startkey in Tools folder. Copy and paste ID and activation key to corresponding area. Then press Save.

Note: If it shows unknown LAN-ID error when open EPC-WIS brower, it indicates that you did not install NIC driver. Or uninstall and reinstall NIC driver again.

Activate Vxdiag Benz Xentry 5

Go to Programs to check activation status

Activate Vxdiag Benz Xentry 6

Activation is done. EPS and WIS successfully registered.


Update Benz C6 VCI Firmware 

Open VX Manager driver on desktop

Go to Diagnostic to install Benz driver

Activate Vxdiag Benz Xentry 7

Activate Vxdiag Benz Xentry 8

Choose Benz program and install benz C6 driver

Activate Vxdiag Benz Xentry 9

Press Firmware to run VCI update

Activate Vxdiag Benz Xentry 10

Updating vci firmware in progress. Wait until it finished.

VXDIAG C6 Benz multi tool is ready to use.

Customers who viewed this item also viewed