Xprog-m box software version 5.51 , only can use our software-CD, otherwise the hardware will be damaged without any warranty, cannot be repaired if you use other version software(lower or higher) or try to update the software or hardware.
xprog-box software version:5.51, only use our software-CD, the hardware will be damaged without any warrany & cannot be repaired if you use other version software
New released XPROG-M V5.51, hot sale in market, contain more authorization than XPROG-M V5.45!
The XPROG-M project is a continuation of the project XPROG and now supports more than 450 units (serial EEPROM`s, Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others).
XPROG-box hardware(Aluminium enclosure) .
CD with XPROG-box software (V5.4.5)
Basic software authorizations and programming adapters set.
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATmega family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
XPROG hardware registration
Product Code Description
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Processor: INTEL Pentium 60MHz or faster (depends on operating system)
Memory (RAM): 64MB (depends on operating system)
Hard drive: 20MB free space
Communication: One free physical COM or USB port
Attention for xprog-box 5.45
1. Shut off the computer anti-software . if not , will kill the software
2. Close the internet. If not ,will damaged the hardware ,and cannot be repaired without any warranty.
3. Uninstall all the xprog-m, or xprog box software -higher or lower software, make sure that your pc only install our software for our xprog-box 5.45 , our xprog-box hardware cannot work on other lower or higher software. the hardware will be burned and damaged ,cannot be repaired without any warranty if you run our hardware on other software .
4. Never try to UPDATE online or offline, the hardware will be burned damaged if you want to try to upgrade it online or offline from official website, without any warranty.
5. we cannot refund ,cannot exchange, cannot repair if you do not listen to those advice above. It means that you accept those conditions if you have ordered our xprog-box 5.45
Q: What's the difference between V5.3 xprog-m and V5.45 xprog-m?
A: V5.45 xprog-m added more function, such as:
AUTH-0023-2 XC23xx 65
please see the following pictures, v5.3 xprog-m has no the following function: