MINI VCI for Toyota TIS Single Cable, from original Xhorse,supports Toyota and Lexus Diagnose after 1996 year. With lowest price and great performance,mini vci will become Toyota car owner's favorite.
Xhorse MINI VCI now stops production, please buy MINI VCI cable SV46-B or SV46-D instead.
Xhorse MINI VCI for Toyota TIS Single Cable
Top 7 Reasons to Get MINI VCI:
1. Firmware version: 2.0.4
2. Supports Toyota TIS OEM diagnostic software
Cost-effective, price is only one-third of similar foreign products.
4. High performance with ARM CPU inside.
5. High reliability of products using SMD chip, and certified by CE and FCC.
6. Supports all of diagnostic communication protocols needed for Toyota (since 1996).
7. Supports K-Line ISO 9141/KWP 2000 ISO 14230-4/SAE J1850 PWM/SAE J1850 VPW/CAN 2.0B ISO 11898 /CAN ISO 15765-4
Because there is no Toyota 22pin connector in this package ,it can only support Toyota 16pin cars.
MINI VCI Techstream Software Display:
Xhorse MINI VCI cable Features
High performance with ARM cpu inside.
High reliability of products using SMD chip, and certified by CE and FCC.
Upgrade the firmware via the Internet to improve product.
Mini VCI firmware version: V2.0.4
MINI VCI PCB Board:
Xhorse Mini VCI FW2.0.4 J2534 cable vs. clone Mini VCI FW 1.4.0 cable
If you would want to reset immo, or make customization to cars, need at least 2.0.4 FW with 2.0.4 FW there is change in PCB,
as it support VPW, and has extra security chip on the other hand, all these simple clones with 1.4.0 FW support only CAN and
K line VPW protocol is unsupported in 1.4.0 FW, and there is no parts for it on PCB.
Mini VCI firmware V2.0.4 cable support VPW protocol, Toyota immo reset and customization, while the clone cables do not.
1pc x MINI VCI 16Pin Cable
1pc x CD Driver
Q:What’s the difference between SV46 with SP61?
A: SV46 does not include Toyota 22PIN cable, only contains Toyota 16pin cable.
While,SP61 includes Toyota 22PIN.
How to install MINI VCI Toyota TIS Software
Following is the installation instruction for Mini VCI.
Installation Instructions For Mini VCI:
Please make sure your windows system is 32bit(Windows xp or 7), the 64bit system may cause problems.
Step1. install "TIS_Techstream_Setup.exe"
Step2. After the installation, don't run the software Techstream
2.1 Install "MVCI Driver for TOYOTA.msi"
2.2 run the "TISKEY.exe" in CD to Active the software automatically, the Icon "VCXConnect" on desktop is no use, you can delete
Step3. Run the "Techstream" on desktop
3.1 Select the area as "Europe"
3.2 Select the language you want
3.3 The register information, you can write everything you want, fill all the blank, then OK
Step4. Interface Select
4.1 Click the [Setup] menu, then click the [VIM Select], then select the [Xhorse-MVCI] in the drop down list of "Interface Setup", then Click [OK]