PSA-COM is a diagnostic program for Peugeot/Citroen vehicles. It can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS etc. and also can display identification, read and clear fault code memory, display and record measured values and perform actuator tests.
PSACOM BT PSA-COM Bluetooth Diagnostic program for Peugeot Citroen
PSACOM Bluetooth is diagnostic tool for Peugeot Citroen, dealer level diagnostic and programming advanced device, it is able to communicate with Bluetooth.
PSA-COM Adapter Hardware:
Our OBD2 to USB PSA-COM interface contains 8x ISO9141 K-Line, 1x ISO9141 L-Line, CAN-BUS and analog measurement circuits.
PSA COM Bluetooth Compatible Protocols:
ISO15765, PSA2000, Bosch KW71 and PSA2.
Operation System (OS):
PSA-COM Bluetooth diagnostic interface is compatible with Windows 2000, WinXP, Vista, Win7 Win8 Win8.1 Win10 or Linux and Mac OS/X (using Wine emulation)
PSACOM BT PSA-COM Scanner Features:
Fully multiplexed all-in-one Bluetooth interface
Automatic ECU recognition
Automatic vehicle scan
ECU Identification : – finds all the available ECUs in the car by pressing the single button.
Bluetooth – wireless connectivity to your Windows laptop or tablet
Fault code (DTC) reading
Fault code clearing, with the ability to store DTC vehicle history forever
Freeze frame reading
Measured vaules / live data Live data recording, fully dynamic with graphing of up to 6 data streams at a time, recording and other manipulations
Diagnostic protocol printing
Actuator tests , test components via direct ECU access
Special Functions - Perform Dealer Level High Programming / Coding Such as:
DPF (Diesel Particulate Filter) regeneration
EGR (Exhaust Gas Recirculation) self-test
Power Steering calibration
How to install PSA-COM Peugeot Citroen software
How to use PSA COM to diagnose Citroen vehicles
How to use PSA-COM to diagnose Peugeot vehicles
This article show a guide on how to install PSA-COM diagnostic software, hope this guide can help you to solve your installation projects.
Insert attached CD to your CD-ROM.
Run installation file PSAComSetup.exe
Choose language of installer
Choose your destination folder for PSA-COM
PSA-COM interface drivers are automatically updated during PSA-COM installation. When prompted to install„unsigned“ drivers, click on „Install this driver software anyway“ (Microsoft® Windows® 7) or „ContinueAnyway“ (Microsoft® Windows® XP. ).
Microsoft® Windows® will automatically install drivers when you plug-in the PSA-COM interface to USBport.
You should not be connected to a vehicle until now.
Please note: all program files (including updates) and documentation are available on enclosed CD-ROM.
Connect PSA-COM to the vehicle – starting with diagnosis.
Connect the PSA-COM interface to your computer. LED indicator should start blinking.
Connect PSA-COM to OBD-II connector in the vehicle.If you cannot find location of the OBD-II connector, you can use PSA-COM location image database,available under OBD-II Connector location from main menu:
Set-up PSA-COM application.
Select Settings from PSA-COM main menu and configure PSA-COM interface port. If no ports are shown, click Refresh button.Then choose appropriate port and click on Test Interface to makesure everything is OK. Then you should see updated interfaceinformation. Click on Apply changes or Save changes button tosave changes and return to main menu.
Your computer is ready to connect to control units now. In main menu, you can use either direct control unitselection (by clicking on Select Control unit button), or perform Auto-scan that will list all control units presentin the vehicle. Before you get to choosing the control units, you must enter exact vehicle model, otherwisediagnosis may fail.