RD150X Steelmate Rolling Code Mutual-Duplicating Remote Controller, there is 315 and 433MHZ to choose.
RD150X Steelmate Rolling Code Mutual-Duplicating Remote Controller
Suitable for remote control rolling code chip: HCS200 and HCS201, specially for mutual duplicating Steelmate Remote Control.
Configuration and Parameters:
Number of buttons: 3 buttons (lock button, unlock button, rear box button)
Battery: 2016*2 Working Voltage: 6V
Parts: Pins, key blank
Dimensions: 35 × 72 × 17mm
Operation guide for Mutual-Duplicating Remote Controller
It's necessary to clear the original codes of the copy code remote control.
Press and hold the "unlock" button and "luck" button simultaneously for 2 seconds till the LED indicator flashes 3 times.
Keep pressing the "lock button" button and release the "unlock" button, then press the "unlock" button for 3 times within 5 seconds.
The LED indicator fast flashes 2 times to indicate the code clear is finished.
Firstly mutual duplicating "luck" button, then "unlock" button.
In case if you lost the codes you are using by accident, dont worry you can retrieve them by following the step below:
firstly mutual duplicating "unlock" button, then match key in the car.
1X RD150X Steelmate Rolling Code Mutual-Duplicating Remote Controller