2010 /2014 OPCOM firmware 1.70 diagnostic tool works perfect for Opel cars diagnostics, including new cars with CAN-BUS, such as Vectra-C, Astra-H,Zafira-B.
Opcom OP-Com 2010 /2014V Can OBD2 for OPEL Firmware V1.7
New OPCOM V1.7 Firmware 2010V Software Feature:
1. OPCOM is a special PC-based diagnostic interface especially for OPEL.
2. Software Version:2010/2014 Firmware Version: 1.7
3. DO NOT update opcom online; otherwise, the device would be damaged!
New OPCOM V1.70 Firmware 2010/2014V Software Function:
1. It covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program allows users to read out and clear fault codes, shows you live data and perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
4. Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer,
and users need select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all information available:
Full fault code text description:
1) Full status information (Present, Not present, Intermittent)
2) Users can print out, save, or copy the fault codes to any other application.
From the fault codes window, users can go directly to the measuring blocks window.
3) The program shows measuring block information on many control module, users can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously.
The sample rate is depends mostly on the communication protocol.
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
Users can also run output tests on many controllers.
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
1pc x OP COM Interface
1pc x USB Cable
1pc x Software and Drivers CD
OP COM PCB Display
Here is something you need to know about Opel diagnostic cable Op-com firmware 1.70 fw 1.65 fw 1.59 fw 1.45, including differences and similarities of op-com firmware & software.
Similarities of Opcom firmware 1.70 fw 1.65 fw 1.59 fw 1.45
- Opcom price: almost the same!
Each version of Opcom firmware available for $20 around
Opcom for sale: https://www.Gm-Tech2.com/producttags/opcom.html
In other words, functions: the same! Op com software crack, Vaux-com 120309a can be used with opcom fw 1.70 fw 1.65 fw 1.59 fw 1.45.
it allows users to read out and clear fault codes, read live data and perform output test. Also, print out, save, or copy the fault codes to any other application. And measure block information on many control modules & show 8 measuring block parameter simultaneously.
- System requirement: the SAME!
Window XP is the only one system can be run with Vaux-com 120309a either 2010 version or 2014 version
- Unable to update: the SAME!
Opcom china clone is not allowed to update online; otherwise, the device would be damaged!
- Vehicle coverage: the SAME!
Opel vehicles (up to the 2014 year) can be supported by clone Op-com fw 1.70 fw 1.65 fw 1.59 fw 1.45 with Vaux-com 120309a. it covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B, and supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
- PCB with the the PIC18F458 chip
Though the pcb design differs from firmware versions, they all come with the PIC18F458 chip.
(Check differnt opcom PCB on each opcom webpage.)