- Support BENZ DOIP
- Software: 500GB 2022.06 version
- VXDiag support add more original software in feature
2022.06 ALLScanner VXDIAG BENZ C6 Diagnostic Tool Supports Benz DOIP
- Supports Benz vehicles 2005-2020
- With DTS Monaco software 8.13.029 and CBF CCF files
- Compatible with original BENZ software
- BMW, GM, Ford, Mazda, Toyota, Honda, LandRover, Jaguar, Subaru, Volvo, VW can be paid for activation
- Software: 500GB 2022.06 version ( Laptop suggested: LENOVO T420 T440 X201, DELL E5420 E6420, Panasonic CF53 54 31)
- VXDIAG BENZ C6 Hardware supports 4- way CAN BUS and 2-way K - Line / L- Line, support multi- protocol high- speed and concurrent communication
- With the innovation design of OBD II intelligent bus protocol routing hardware, a diagnostic plug can be intelligent identification test all models, fully meet the future demand for all kinds of bus communication
VXDIAG Xentry Diagnostic VCI for Benz Product Features:
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Tyre Pressure Control
D2b Command & Audio Gateway (D2B and MOST networks)
Headlamp Range Adjustment
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems
Diesel Particulate Filter (DPF) Regeneration
VXDIAG Benz Software: 2022.06
XENTRY 220.127.116.11 v4
DTS Monaco 8.13.029
VXDIAG C6 DOIP Summary:
The new VXDIAG For XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
The VXDIAG For XENTRY Diagnosis VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
1. Please install the 500GB SDD on laptop above 4GB Memory and I5 CPU.
2. Not for All Key Lost,needs one key at least.
3. Do Not change the laptop or software may get broken, the only solution is shipping SDD back for copying new software.
Processor: Pentium 4 / 1.6GHz+.
Memory: 1G Bytes or more.
Hard disk: 40G or more.
Display: Resolution 1024x768 or higher.
Network interfaces: LAN 10 / 100M or 802.11b / g.
Communication Interface: USB2.0 or USB3.0
RAM 32bit180MHz ARM
FLASH 1MByte FALSH
Diagnostic Port 24PIN, self-determination design
LED 4 LED indicator light,indicate power and status.
Power DC 9V-36V
Working Temperature -20°C~70 °C
Storage Temperature -40°C~85 °C
Warranty: One Year
1pc x BENZ C6 Main Unit
1pc x OBD cable
1pc x USB cable
1pc x Network cable
1pc x 500GB SSD
How to Activate VXDIAG Benz Xentry EPC WIS?
Benz W221 ME9.7 Online Coding with VXDIAG Benz C6
Benz Audio Gateway flash programming with VXDIAG C6 DTS Monaco
Benz W211 CBF DTS Monaco Diagnosis and Programming
You need to perform a VXDIAG Benz C6 DoIP VCX firmware reset with these scenarios:
1.Failed to update firmware, need to reset VCX.
(Check: How to update VXDIAG Benz firmware)
2.Device connect well with vehicle and laptop, indicators turn on, VX Manager cannot find the device.
How to reset VXDIAG Benz C6 VCX firmware?
Press Reset button on VCX unit
Connect VCX-DoIP with vehicle via USB to power on
Release the reset button after connecting to computer
After reading the device IP, click on DOIP-NET
Browse to U-Boot Update for VCXNet v1.1.0
Select Firmware location to reset: C:\Program Files (x86)\VCX\VCXMan\Tools\VCXDoIP\release
Update in progress
The management tool will find the device IP. The firmware reset is completed.
Now open the VX Manager. It will detect the VXDIAG C6 Benz VCX-DoIP diagnostic interface.
Device is ready to use.