XPROG-M V5.55 XPROG M Programmer with USB Dongle,the only version XPROG-M can decypte new version BMW CAS4.Add new authorization: AUTH-0025 Authorized 11/4/2014
Newest XPROG-M V5.5.5 X-PROG M BOX V5.55 ECU Programmer with USB Dongle
XPROG-M V5.5.5 Authorizations:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0024-3 9S12XE SECURITY
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014
XPROG-M V5.5.5 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
Operating System Required: WIN xp or win7 32bit
1pc x XPROG-Box Hardware (Aluminum Enclosure) .
19pcs x Basic Software Authorizations and Programming Adapters Set
1pc x USB Cable.
1pc x USB Dongle
1pc x CD with XPROG-Box Software (V5.5.5)
How to install xprog m 5.55 software
Here are the Xprog M V5.55 ECU programmer error solutions that users often encounter.
– DEVICE IS SILENT
– Certificate expired and needs to be updated,or validated
– Can not find the key
– Access violation at address 1283DF84 in module “argen.dll”. Read of address 7A2BFC7A.
– Unknown command: Software error
–Xprog-box v5.55 Safengine error
XPROG-M V5.48 ERROR “DEVICE IS SILENT”
3 possible reasons & solutions:
-the USB cable problem and need to replace
-my computer is not compatible with Xprog-M, better download and install their Ghost Windows Xp Professional Sp3, download link
-If Xprog V5.48 still fails to read, then update Xprog 5.48 to higher version V5.0/V5.50/V5.55 or read it with Xhorse VVDI PROG programmer (this is the ideal ECU programmer for CAS4)
XPROG-M V5.50 error: “Certificate expired and needs to be updated,or validated”
Found solution to Chinese Xprog v5.55 (update with ATMEGA64 Repair Chip)
Dongle(key) should have 2(two) instances in device manager (HID-compliant device and USB human interface)
No virtual ET199,no several HID-compliant—just those two I listed. And it works properly then.
XPROG 5.55 error message “Can not find the key!”
do you connect usb dongle first.when you connect dongle (after complet install xprog 5.55 software and driver for sure)the led into dongle light windows make drivers install for this dongle when it finish the led into dongle blinking then connect the xprog 5.55 to usb.Ive installed into a windows 7, no problem.
XPROG 5.5.5 error message: Xprogdesktop: Access violation at address 1283DF84 in module “argen.dll”. Read of address 7A2BFC7A.
Change another laptop and re-install V5.5.5 X-prog box software.
Recommend operating system: Win XP and Win 7
XPROG-M error massage: Unknown command: Software error
ATMEGA64 CPU repair chip can help to fix this hardware problem. only need replace the XPROG-M V5.50 old CPU chip with the New CPU chip, then done!
Xprog-M v5.55 Safengine error
When i installed Xprog M V5.55 software, the Safengine error □□□□□□□□ popped up
Solved by professional technicians!
Open Computer Management and the find out ET199 to uninstall it
(there should be lots of ET199, uninstall all)
Restart the computer
Install the patch file in the CD
Then Xprog-m 5.55 would work fine, usually.
If it still not work, please contact our customer service to send you our Windows XP operating system.