Yanhua Mini ACDP Read BMW DME ISN Code (when all keys lost) No need Soldering.
YANHUA Mini ACDP BMW DME ISN Read Module 3 Without Soldering
Read & Write BMW DME ISN Code by OBD when all key lost, no need soldering
ISN Supported List by MODULE 3:
Read and Write ISN Code:
Read/write N20/N55/N13 ISN code via OBD
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.
Supports BMW key programming for CAS, FEM & BDC systems
1pc x BMW-N13 port board
1pc x N20 caliper for opening the hole of shell
1pc x N13 firmware
Module 3 must be used with Yanhua Mini ACDP basic module
N20(MEVD1724, MEVD172P, MEVD1729), N13(MEVD1725, ), N55(MEVD172, MEVD1726, MEVD172G, MEVD172S, MEVD17, ), MSV80, MSD81, MS085,
MSD85HY, MSD87, MSV90, MEVD1728(s63), MEV1722, MED172, MEVD1727, DDE701,DC17C50, BMSX...
ISN Read by OBD:
MSD851 (supports E-series only currently) DME
BMW MEV1722 Engine OBD ISN Function
Read N62_TUE2 DME ISN(Supports E Chassis)
Read MEV9N46 DME ISN(Support E Chassis)
Read MEV9N46L DME ISN(Support E Chassis)
ISN Read (Remove DME)
What's new on MODULE 3?
ISN read/write and ecu clone via bench mode
ISN Reading and Clone via Bench Mode
Diesel Engine Computer ISN Read/Write and Clone
DME ISN Read/Write and Clone
Diesel DME ISN Read/Write and Clone
Yanhua Mini ACDP read BMW MSV80 DME ISN code no soldering
Yanhua ACDP read BMW ISN code by OBD
How to switch on the OBP+ICP adapter when reading ISN code from BMW DME?
Question：How to use the switch on the OBP+ICP adapter?
1:All operations except the DME read and write the ISN code option operate by pushing the switch to gear “NC”.
2: When you do the DME read and write the ISN code option, when prompted as shown in the figure below, push the switch to the gear "CAN_R_Join"
ACDP introduces 2 Ways to Read/Write N20/N55/N13 ISN without Opening DME shell
Read and Write directly through OBD. Shown as picture below:
Read and write ISN on the desktop platform.
No need to open the DME shell.
(Contact Gm-Tech2.com customer service if you need the desktop platform)
N20/N13 wiring connection
Shorten the jumper to the “CAN-R-Join” port according to the marked position
Yanhua ACDP BMW N55 DME Wiring Connection